Reference Guide

Property Description
• 6 = Offline — Indicates that the element has been requested to
transition to the Enabled but Offline EnabledState.
• 7 = Test
• 8 = Deferred
• 9 = Quiesce
• 10 = Reboot — Refers to doing a Shut Down and then moving to
an Enabled state.
• 11 = Reset — Indicates that the element is first Disabled and then
Enabled.
• 12 = Not Applicable
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
The actual state of the element is represented by EnabledState. This
property is provided to compare the last requested and current
enabled or disabled states. Note that when EnabledState is set to 5
(Not Applicable), then this property has no meaning. Refer to the
EnabledState property description for explanations of the values in
the RequestedState enumeration.
NOTE: The value No Change (5) has been deprecated instead of
indicating the last requested state is Unknown (0). If the last
requested or desired state is unknown, RequestedState should
have the value Unknown (0), but may have the value No Change
(5).
There are two new values in RequestedState that build on the
statuses of EnabledState. These are Reboot (10) and Reset (11). Shut
Down requests an orderly transition to the Disabled state, and may
involve removing power, to completely erase any existing state. The
Disabled state requests an immediate disabling of the element, such
that it will not execute or accept any commands or processing
requests.
This property is set as the result of a method invocation (such as Start
or StopService on CIM_Service), or can be overridden and defined as
WRITEable in a subclass. The method approach is considered
superior to a WRITEable property, because it allows an explicit
invocation of the operation and the return of a result code.
If knowledge of the last RequestedState is not supported for the
EnabledLogicalElement, the property is NULL or has the value 12 Not
Applicable.
SystemCreationClassName
The CreationClassName of the scoping System.
SystemName
The Name of the scoping System.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
201