Reference Guide

Property Description
the implementation, 1 (Not Supported) shall be returned. If the
method is supported, but has not completed due to an unspecified
error, 2 (Error) shall be returned. If the method is supported and has
completed successfully, 0 (Completed with No Error) shall be
returned. The method may return an instance of CIM_Error.
RemoteBIOSUpdate (Method)
This method is called to remotely update the BIOS image. It takes the
hdr file of the BIOS image as the only parameter.
DCIM_SoftwareInstallationService
Property Description
CreationClassName
Indicates the name of the class or the subclass that is used in the
creation of an instance. When used with the other key properties of
this class, this property allows all instances of this class and its
subclasses to be uniquely identified.
EnabledDefault
An enumerated value indicating an administrator's default or startup
configuration for the Enabled State of an element.
Possible values are:
• 2 = Enabled
• 3 = Disabled
• 5 = Not Applicable
• 6 = Enabled but Offline
• 7 = No Default
• 9 = Quiesce
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
By default, the element is Enabled (value = 2).
EnabledState
An integer enumeration that indicates the enabled and disabled states
of an element. It can also indicate the transitions between these
requested states. For example, shutting down (value = 4) and starting
(value = 10) are transient states between enabled and disabled.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Enabled — Indicates that the element is or could be executing
commands, will process any queued commands, and queues new
requests.
• 3 = Disabled — Indicates that the element will not execute
commands and will drop any new requests.
• 4 = Shutting Down — Indicates that the element is in the process
of going to a Disabled state.
• 5 = Not Applicable — Indicates the element does not support
being enabled or disabled.
199