Reference Guide

Property Description
6 (OS Specific), then the PowerUtilizationMode is equal to 3
(Dynamic).
• 7 = Active Power Utilization — Indicates that the service is
employing a specific algorithm to yield the best power
conumption and performance for the affected managed
elements. If the property value is 7 (Active Power Utilization),
then the PowerUtilizationMode is equal to 3
PowerUtilizationMode
Indicates the current power utilization mode implemented by the
service. The mode selection is a generally made infrequently as part
of element configuration.
Possible values are:
• 0 = Unknown — Indicates the last requested state for the element
is unknown.
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change
• 6 = Offline — Indicates that the element has been requested to
transition to the Enabled but Offline EnabledState.
• 7 = Test
• 8 = Deferred
• 9 = Quiesce
• 10 = Reboot — Refers to doing a Shut Down and then moving to
an Enabled state.
• 11 = Reset — Indicates that the element is first Disabled and then
Enabled.
• 12 = Not Applicable
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
RequestedState
An integer enumeration that indicates the last requested or desired
state for the element, irrespective of the mechanism through which it
was requested. The actual state of the element is represented by
EnabledState. This property is provided to compare the last requested
and current enabled or disabled states.
Possible values are:
• 0 = Unknown — Indicates the last requested state for the element
is unknown.
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change
• 6 = Offline — Indicates that the element has been requested to
transition to the Enabled but Offline EnabledState.
• 7 = Test
• 8 = Deferred
• 9 = Quiesce
194