Reference Guide

Property Description
this class, this property allows all instances of this class and its
subclasses to be uniquely identified.
EnabledDefault
An enumerated value indicating an administrator's default or startup
configuration for the Enabled State of an element. By default, the
element is Enabled (value = 2).
Possible values are:
• 2 = Enabled
• 3 = Disabled
• 5 = Not Applicable
• 6 = Enabled but Offline
• 7 = No Default
• 9 = Quiesce
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
EnabledState
An integer enumeration that indicates the enabled and disabled states
of an element. It can also indicate the transitions between these
requested states. For example, shutting down (value = 4) and starting
(value = 10) are transient states between enabled and disabled.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Enabled — Indicates that the element is or could be executing
commands, will process any queued commands, and queues new
requests.
• 3 = Disabled — Indicates that the element will not execute
commands and will drop any new requests.
• 4 = Shutting Down — Indicates that the element is in the process
of going to a Disabled state.
• 5 = Not Applicable — Indicates the element does not support
being enabled or disabled.
• 6 = Enabled but Offline — Indicates that the element may be
completing commands, and will drop any new requests.
• 7 = In Test — Indicates that the element is in a test state.
• 8 = Deferred — Indicates that the element may be completing
commands, but will queue any new requests.
• 9 = Quiesce — Indicates that the element is enabled but in a
restricted mode.
• 10 = Starting
• 11..32767 = DMTF Reserved
• 32768..65535 = Vendor Reserved
Name
The Name property uniquely identifies the Service and provides an
indication of the functionality that is managed. This functionality is
described in more detail in the Description property of the object.
192