Reference Guide

Property Description
• 6 = Enabled but Offline — Indicates that the element may be
completing commands, and will drop any new requests.
• 7 = In Test — Indicates that the element is in a test state.
• 8 = Deferred — Indicates that the element may be completing
commands, but will queue any new requests.
• 9 = Quiesce — Indicates that the element is enabled but in a
restricted mode.
• 10 = Starting — Indicates that the element is in the process of
going to an Enabled state. New requests are queued.
• 11..32767 = DMTF Reserved
• 32768..65535 = Vendor Reserved
Name
The Name property uniquely identifies the Service and provides an
indication of the functionality that is managed. This functionality is
described in more detail in the Description property of the object.
SystemCreationClassName
The CreationClassName of the scoping System.
SystemName
The Name of the scoping System.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change — Indicates that no transition is in progress.
• 6 = Offline
• 7 = Test
• 8 = Defer
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable — Indicates the implementation does not
support representing ongoing transitions.
A value other than 5 or 12 identifies the state to which the element is
in the process of transitioning.
DCIM_PowerUtilizationManagementService
Property Description
CreationClassName
Indicates the name of the class or the subclass that is used in the
creation of an instance. When used with the other key properties of
191