Reference Guide

Property Description
EnabledDefault
An enumerated value indicating an administrator's default or startup
configuration for the Enabled State of an element.
Possible values are:
2 = Enabled
3 = Disabled
5 = Not Applicable
6 = Enabled but Offline
7 = No Default
9 = Quiesce
.. = DMTF Reserved
32768..65535 = Vendor Reserved
By default, the element is Enabled (value = 2).
EnabledState
An integer enumeration that indicates the enabled and disabled states
of an element. It can also indicate the transitions between these
requested states. For example, shutting down (value = 4) and starting
(value = 10) are transient states between enabled and disabled.
Possible values are:
0 = Unknown
1 = Other
2 = Enabled — Indicates that the element is or could be executing
commands, processes any queued commands, and queues new
requests.
3 = Disabled — Indicates that the element will not run commands
and drops any new requests.
4 = Shutting Down — Indicates that the element is in the process
of going to a Disabled state.
5 = Not Applicable — Indicates that the element does not support
being enabled or disabled.
6 = Enabled but Offline — Indicates that the element may be
completing commands, and drops any new requests.
7 = In Test — Indicates that the element is in a test state.
8 = Deferred — Indicates that the element may be completing
commands, but queues any new requests.
9 = Quiesce — Indicates that the element is enabled but in a
restricted mode.
10 = Starting — Indicates that the element is in the process of
going to an Enabled state. New requests are queued.
11..32767 = DMTF Reserved
32768..65535 = Vendor Reserved
Name
The Name property uniquely identifies the Service and provides an
indication of the functionality that is managed. This functionality is
described in more detail in the Description property of the object.
RequestedState
An integer enumeration that indicates the last requested or desired
state for the element, irrespective of the mechanism through which it
179