Reference Guide

Property Description
• 6 = IDRAC MAC Address
• 7 = Service Tag
• 8 = System Name
• 9 = IPv6 Address
• 10 = Ambient
• 11 = System Power
DisplayModeUserString
Contains a user configurable string to be displayed on the LCD panel
if DisplayDataCategory has the value 3.
EnabledDefault
An enumerated value indicating an administrator's default or startup
configuration for the Enabled State of an element.
Possible values are:
• 2 = Enabled
• 3 = Disabled
• 5 = Not Applicable
• 6 = Enabled but Offline
• 7 = No Default
• 9 = Quiesce
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
By default, the element is Enabled (value = 2).
EnabledState
An integer enumeration that indicates the enabled and disabled states
of an element. It can also indicate the transitions between these
requested states.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Enabled — Indicates that the element is or could be executing
commands, will process any queued commands, and queues new
requests.
• 3 = Disabled — Indicates that the element will not execute
commands and will drop any new requests.
• 4 = Shutting Down — Indicates that the element is in the process
of going to a Disabled state.
• 5 = Not Applicable — Indicates the element does not support
being enabled or disabled.
• 6 = Enabled but Offline — Indicates that the element may be
completing commands, and will drop any new requests.
• 7 = In Test — Indicates that the element is in a test state.
• 8 = Deferred — Indicates that the element may be completing
commands, but will queue any new requests.
• 9 = Quiesce — Indicates that the element is enabled but in a
restricted mode.
• 10 = Starting — Indicates that the element is in the process of
going to an Enabled state. New requests are queued.
171