Reference Guide

Property Description
superior to a WRITEable property, because it allows an explicit
invocation of the operation and the return of a result code.
If knowledge of the last RequestedState is not supported for the
EnabledLogicalElement, the property is NULL or has the value 12 Not
Applicable.
SystemCreationClassName
The CreationClassName of the scoping system.
SystemName
The System Name of the scoping system.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change — Indicates that no transition is in progress.
• 6 = Offline
• 7 = Test
• 8 = Defer
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable — Indicates the implementation does not
support representing ongoing transitions.
A value other than 5 or 12 identifies the state to which the element is
in the process of transitioning.
DCIM_LCDPanel
Property Description
CreationClassName
Indicates the name of the class or the subclass used in the creation of
an instance. When used with the other key properties of this class,
this property allows all instances of this class and its subclasses to be
uniquely identified.
DeviceID
An address or other identifying information used to uniquely name
the LogicalDevice.
DisplayDataCategory
Identifies the category of data to be displayed on the LCD Panel.
Possible values are:
• 2 = None
• 3 = User Specified
• 4 = Default
• 5 = IPv4 Address
170