Reference Guide

Property Description
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
By default, the element is Enabled (value = 2).
EnabledState
An integer enumeration that indicates the enabled and disabled states
of an element. It can also indicate the transitions between these
requested states.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Enabled — Indicates that the element is or could be executing
commands, will process any queued commands, and queues new
requests.
• 3 = Disabled — Indicates that the element will not execute
commands and will drop any new requests.
• 4 = Shutting Down — Indicates that the element is in the process
of going to a Disabled state.
• 5 = Not Applicable — Indicates the element does not support
being enabled or disabled.
• 6 = Enabled but Offline — Indicates that the element may be
completing commands, and will drop any new requests.
• 7 = In Test — Indicates that the element is in a test state.
• 8 = Deferred — Indicates that the element may be completing
commands, but will queue any new requests.
• 9 = Quiesce — Indicates that the element is enabled but in a
restricted mode.
• 10 = Starting — Indicates that the element is in the process of
going to an Enabled state. New requests are queued.
• 11..32767 = DMTF Reserved
• 32768..65535 = Vendor Reserved
IdentifyingDescriptions
An array of free-form strings providing explanations and details
behind the entries in the OtherIdentifyingInfo array. Note that each
entry of this array is related to the entry in OtherIdentifyingInfo that is
located at the same index.
LogicalModuleType
Identifies the type of LogicalModule this instance represents.
Possible values are:
• 0 = Unknown — Indicates that the LogicalModuleType is
unknown.
• 1 = Other — Indicates that the value is not one of the enumerated
values. OtherLogicalModuleTypeDescription should contain
additional information.
• 2 = Device Tray — Indicates that the device is a device or media
tray, for example in a modular system.
• 3 = Line Card — Indicates that the module is a line card in a
switch.
• 4 = Blade — Indicates the module is a blade inserted into a switch.
• 5..32767 = DMTF Reserved
161