Reference Guide

Property Description
EnabledDefault
An enumerated value indicating an administrator's default or startup
configuration for the Enabled State of an element.
Possible values are:
• 2 = Enabled
• 3 = Disabled
• 5 = Not Applicable
• 6 = Enabled but Offline
• 7 = No Default
• 9 = Quiesce
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
By default, the element is Enabled (value = 2).
EnabledState
An integer enumeration that indicates the enabled and disabled states
of an element. It can also indicate the transitions between these
requested states.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Enabled — Indicates that the element is or could be executing
commands, will process any queued commands, and queues new
requests.
• 3 = Disabled — Indicates that the element will not execute
commands and will drop any new requests.
• 4 = Shutting Down — Indicates that the element is in the process
of going to a Disabled state.
• 5 = Not Applicable — Indicates the element does not support
being enabled or disabled.
• 6 = Enabled but Offline — Indicates that the element may be
completing commands, and will drop any new requests.
• 7 = In Test — Indicates that the element is in a test state.
• 8 = Deferred — Indicates that the element may be completing
commands, but will queue any new requests.
• 9 = Quiesce — Indicates that the element is enabled but in a
restricted mode.
• 10 = Starting — Indicates that the element is in the process of
going to an Enabled state. New requests are queued.
• 11..32767 = DMTF Reserved
• 32768..65535 = Vendor Reserved
For example, shutting down (value = 4) and starting (value = 10) are
transient states between enabled and disabled.
ExternalBusClockSpeed
The speed (in MHz) of the external bus interface (also known as the
front side bus).
Family
The Processor family type.
134