Reference Guide

Property Description
StopService on CIM_Service), or can be overridden and defined as
WRITEable in a subclass. The method approach is considered
superior to a WRITEable property, because it allows an explicit
invocation of the operation and the return of a result code.
If knowledge of the last RequestedState is not supported for the
EnabledLogicalElement, the property is NULL or has the value 12 Not
Applicable.
SystemCreationClassName
The CreationClassName of the scoping system.
SystemName
The System Name of the scoping system.
TotalOutputPower
Represents the total output power of the PowerSupply in milli Watts.
0 denotes unknown.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change — Indicates that no transition is in progress.
• 6 = Offline
• 7 = Test
• 8 = Defer
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable — Indicates that the implementation does not
support representing ongoing transitions.
A value other than 5 or 12 identifies the state to which the element is
in the process of transitioning.
TypeOfRangeSwitching
Describes the kind of input voltage range switching that is
implemented in this PowerSupply.
Possible values are:
• 1 = Other
• 2 = Unknown
• 3 = Manual
• 4 = Autoswitch
• 5 = Wide Range
• 6 = Not Applicable
A value other than 5 or 12 identifies the state to which the element is
in the process of transitioning.
125