Reference Guide

Property Description
6 = Enabled but Offline — Indicates that the element may be
completing commands, and will drop any new requests.
7 = In Test — Indicates that the element is in a test state.
8 = Deferred — Indicates that the element may be completing
commands, but will queue any new requests.
9 = Quiesce — Indicates that the element is enabled but in a
restricted mode.
10 = Starting — Indicates that the element is in the process of
going to an Enabled state. New requests are queued.
11..32767 = DMTF Reserved
32768..65535 = Vendor Reserved
HealthState
Indicates the current health of the element. This attribute expresses
the health of this element but not necessarily that of its
subcomponents.
Possible values are:
0 = Unknown — The implementation cannot report on
HealthState at this time.
5 = OK — The element is fully functional and is operating within
normal operational parameters and without error.
10 = Degraded/Warning — The element is in working order and all
functionality is provided. However, the element is not working to
the best of its abilities. For example, the element may not be
operating at optimal performance or it may be reporting
recoverable errors.
15 = Minor failure — All functionality is available but some may be
degraded.
20 = Major failure — The element is failing. It is possible that some
or all of the functionality of this component is degraded or not
working.
25 = Critical failure — The element is non-functional and recovery
may not be possible.
30 = Non-recoverable error — The element has completely failed,
and recovery is not possible. All functionality provided by this
element has been lost.
.. = DMTF Reserved
SystemCreationClassName
The CreationClassName of the scoping system.
SystemName
The System Name of the scoping system.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
0 = Unknown
2 = Enabled
3 = Disabled
4 = Shut Down
5 = No Change — Indicates that no transition is in progress.
6 = Offline
7 = Test
121