Reference Guide

Property Description
• 11 = Reset — Indicates that the element is first Disabled and then
Enabled.
• 12 = Not Applicable
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
SystemCreationClassName
The CreationClassName of the scoping system.
SystemName
The System Name of the scoping system.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change — Indicates that no transition is in progress.
• 6 = Offline
• 7 = Test
• 8 = Defer
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable — Indicates the implementation does not
support representing ongoing transitions.
A value other than 5 or 12 identifies the state to which the element is
in the process of transitioning.
DCIM_Fan
Property Description
ActiveCooling
ActiveCooling is a Boolean that indicates that the Cooling Device
provides active (as opposed to passive) cooling.
CreationClassName
Indicates the name of the class or the subclass used in the creation of
an instance. When used with the other key properties of this class,
this property allows all instances of this class and its subclasses to be
uniquely identified.
DeviceID
An address or other identifying information used to uniquely name
the LogicalDevice.
ElementName
A user-friendly name for the object. This property allows each
instance to define a user-friendly name in addition to its key
properties, identity data, and description information.
113