Reference Guide

Property Description
NOTE: The value No Change (5) has been
deprecated instead of indicating the last
requested state is Unknown (0). If the last
requested or desired state is unknown,
RequestedState should have the value
Unknown (0), but may have the value No
Change (5).
There are two new values in RequestedState that
build on the statuses of EnabledState. These are
Reboot (10) and Reset (11). Shut Down requests an
orderly transition to the Disabled state, and may
involve removing power, to completely erase any
existing state. The Disabled state requests an
immediate disabling of the element, such that it
will not execute or accept any commands or
processing requests. This property is set as the
result of a method invocation (such as Start or
StopService on CIM_Service), or can be overridden
and defined as WRITEable in a subclass. The
method approach is considered superior to a
WRITEable property, because it allows an explicit
invocation of the operation and the return of a
result code. If knowledge of the last
RequestedState is not supported for the
EnabledLogicalElement, the property is NULL or
has the value
12 (Not Applicable).
Possible values are:
• 0 = Unknown — Indicates the last requested
state for the element is unknown.
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change
• 6 = Offline — Indicates that the element has
been requested to transition to the Enabled but
Offline EnabledState.
• 7 = Test
• 8 = Deferred
• 9 = Quiesce
• 10 = Reboot — Refers to doing a Shut Down
and then moving to an Enabled state.
• 11 = Reset - Indicates that the element is first
Disabled and then Enabled.
• 12 = Not Applicable
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
SystemCreationClassName
The CreationClassName of the scoping system.
SystemName
The System Name of the scoping system.
105