Reference Guide

Property Description
be combined with either OK, Error, or
Degraded so that a client can tell if the
complete operation Completed with OK
(passed), Completed with Error (failed), or
Completed with Degraded (the operation
finished, but it did not complete OK or did not
report an error).
• 18 = Power Mode — Indicates that the element
has additional power model information
contained in the Associated
PowerManagementService association.
• .. = DMTF Reserved
• 0x8000.. = Vendor Reserved
OperationalStatus replaces the Status property on
ManagedSystemElement to provide a consistent
approach to enumerations, to address
implementation needs for an array property, and to
provide a migration path from today's environment
to the future. This change was not made earlier
because it required the deprecated qualifier. Due
to the widespread use of the existing Status
property in management applications, it is strongly
recommended that providers or instrumentation
provide both the Status and OperationalStatus
properties. Further, the first value of
OperationalStatus should contain the primary
status for the element. When instrumented, Status
(because it is single-valued) should also provide
the primary status of the element.
OtherIdentifyingInfo
Captures data, in addition to DeviceID information,
that could be used to identify a LogicalDevice. For
example, you could use this property to hold the
operating system's user-friendly name for the
Device.
PrimaryStatus
Provides a high level status value, intended to align
with Red-Yellow-Green type representation of
status. It should be used in conjunction with
DetailedStatus to provide high level and detailed
health status of the ManagedElement and its
subcomponents.
Possible values are:
• 0 = Unknown — Indicates the implementation
is in general capable of returning this property,
but is unable to do so at this time.
• 1 = OK — Indicates the ManagedElement is
functioning normally.
• 2 = Degraded — Indicates the ManagedElement
is functioning below normal.
• 3 = Error — Indicates the ManagedElement is in
an Error condition.
• .. = DMTF Reserved
103