Reference Guide

Property Description
• 15 = Dormant — Indicates that the element is inactive or
quiesced.
• 16 = Supporting Entity in Error — Indicates that this element
may be OK but that another element, on which it is dependent,
is in error. An example is a network service or endpoint that
cannot function due to lower-layer networking problems.
• 17 = Completed — Indicates that the element has completed
its operation. This value should be combined with either OK,
Error, or Degraded so that a client can tell if the complete
operation Completed with OK (passed), Completed with Error
(failed), or Completed with Degraded (the operation finished,
but it did not complete OK or did not report an error).
• 18 = Power Mode — Indicates that the element has additional
power model information contained in the Associated
PowerManagementService association.
• .. = DMTF Reserved
• 0x8000.. = Vendor Reserved
OperationalStatus replaces the Status property on
ManagedSystemElement to provide a consistent approach to
enumerations, to address implementation needs for an array
property, and to provide a migration path from today's environment
to the future. This change was not made earlier because it required
the deprecated qualifier. Due to the widespread use of the existing
Status property in management applications, it is recommended
that providers or instrumentation provide both the Status and
OperationalStatus properties. Further, the first value of
OperationalStatus should contain the primary status for the
element. When instrumented, Status (because it is single-valued)
should also provide the primary status of the element.
PortType
PortType is defined to force consistent naming of the type
property in subclasses and to guarantee unique enum values for all
instances of NetworkPort. When set to 1 (Other), related property
OtherPortType contains a string description of the type of port. A
range of values, DMTF_Reserved, has been defined that allows
subclasses to override and define their specific types of ports.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Not Applicable
• 3..15999 = DMTF Reserved
• 16192 = Parallel Port
• 16193 = Serial Port
• 16194 = Pointing Device
• 16195 = Keyboard
• 16196 = Processor
• 16197 = Memory Device
• 16198 = USB
• 16199 = Monitor
• 16200 = SCSI
• 16201..65535 = Vendor Reserved
PrimaryStatus
Provides a high-level status value, intended to align with Red-
Yellow-Green type representation of status. It should be used with
DetailedStatus to provide high level and detailed health status of
the ManagedElement and its subcomponents.
Possible values are:
76 Dell Command | Monitor 10.3 classes and properties