Reference Guide
Property Description
subclassed to be a Key. It is not reasonable that the
same property can convey both identity and a user-
friendly name, without inconsistencies. Where Name
exists and is not a Key (such as for instances of
LogicalDevice), the same information can be present in
both the Name and ElementName properties.
EnabledDefault
An enumerated value indicating an administrator's default or
startup configuration for the Enabled State of an element.
Possible values are:
• 2 = Enabled
• 3 = Disabled
• 5 = Not Applicable
• 6 = Enabled but Offline
• 7 = No Default
• 9 = Quiesce
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
By default, the element is Enabled (value = 2).
EnabledState
An integer enumeration that indicates the enabled and disabled
states of an element. It can also indicate the transitions between
these requested states. For example, shutting down (value = 4)
and starting (value = 10) are transient states between enabled and
disabled.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Enabled — Indicates that the element is or could be
executing commands, processes any queued commands, and
queues new requests.
• 3 = Disabled — Indicates that the element will not run
commands and drops any new requests.
• 4 = Shutting Down — Indicates that the element is in the
process of going to a Disabled state.
• 5 = Not Applicable — Indicates that the element does not
support being enabled or disabled.
• 6 = Enabled but Offline — Indicates that the element may be
completing commands, and drops any new requests.
• 7 = In Test — Indicates that the element is in a test state.
• 8 = Deferred — Indicates that the element may be completing
commands, but queues any new requests.
• 9 = Quiesce — Indicates that the element is enabled but in a
restricted mode.
• 10 = Starting — Indicates that the element is in the process of
going to an Enabled state. New requests are queued.
• 11..32767 = DMTF Reserved
• 32768..65535 = Vendor Reserved
HealthState
Indicates the current health of the element. This attribute
expresses the health of this element but not necessarily that of its
subcomponents.
Possible values are:
74 Dell Command | Monitor 10.3 classes and properties