Reference Guide

Property Description
• 0 = Not in a RAID Set
• 1 = In a RAID Set
• 2 = Hot Spare
Model
This property represents the model name of the physical disk.
SerialNumber
This property represents the serial number of the physical disk.
DriveAFStatus
This property indicates if the physical disk is an advanced format
drive.
Possible values are:
• 0 - Non AF Drive
• 1 - AF Drive
• 2 - Unknown
DCIM_VirtualDiskView
Table 15. VirtualDiskView
Property Description
ElementName
A user-friendly name for the object. This property allows each
instance to define a user-friendly name in addition to its key
properties, identity data, and description information.
NOTE: The Name property of ManagedSystemElement is
also defined as a user-friendly name. But, it is often sub-
classed to be a Key. It is not reasonable that the same
property can convey both identity and a user-friendly
name, without inconsistencies. Where Name exists and
is not a Key (such as for instances of LogicalDevice), the
same information can be present in both the Name and
ElementName properties.
InstanceID
The property contains the value of the Fully Qualified Device
Description (FQDD).
PrimaryStatus
This property represents the status of the device.
Possible values are:
• 0 = Unknown
• 1 = OK
• 2 = Degraded
• 3 = Error
• 4 = Rebuilding
• 5 = Offline
RAIDStatus
This property represents the RAID specific status.
Possible values are:
• 0 = Unknown
• 1 = Ready
• 2 = Online
• 3 = Foreign
• 4 = Offline
• 5 = Blocked
• 6 = Failed
56 Dell Command | Monitor 10.3 classes and properties