Reference Guide

Property Description
• 11 = Wireless LAN
Name
The Name property defines the label by which the object is known. When subclassed, the Name
property can be overridden to be a Key property.
RequestedState
An integer enumeration that indicates the last requested or desired state for the element,
irrespective of the mechanism through which it was requested. The actual state of the element is
represented by EnabledState. This property is provided to compare the last requested and current
enabled or disabled states. Note that when EnabledState is set to 5 (Not Applicable), then this
property has no meaning. See the EnabledState property description for explanations of the values
in the RequestedState enumeration. Unknown (0) indicates the last requested state for the
element is unknown.
NOTE: The value No Change (5) has been deprecated instead of indicating the last
requested state is Unknown (0). If the last requested or desired state is unknown,
RequestedState should have the value Unknown (0), but may have the value No
Change (5). There are two new values in RequestedState that build on the statuses of
EnabledState. These are Reboot (10) and Reset (11).
Shut Down requests an orderly transition to the Disabled state, and may involve removing power, to
completely erase any existing state. The Disabled state requests an immediate disabling of the
element, such that it will not execute or accept any commands or processing requests. This
property is set as the result of a method invocation (such as Start or StopService on CIM_Service),
or can be overridden and defined as WRITEable in a subclass. The method approach is considered
superior to a WRITEable property, because it allows an explicit invocation of the operation and the
return of a result code. If knowledge of the last RequestedState is not supported for the
EnabledLogicalElement, the property is NULL or has the value 12 Not Applicable.
Possible values are:
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change
• 6 = Offline — Indicates that the element has been requested to transition to the Enabled but
Offline EnabledState.
• 7 = Test
• 8 = Deferred
• 9 = Quiesce
• 10 = Reboot — Refers to performing a Shut Down and then moving to an Enabled state.
• 11 = Reset — Indicates that the element is first Disabled and then Enabled.
• 12 = Not Applicable
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
SystemCreationClassName
The creation classname of the scoping system.
SystemName
The system name of the scoping system.
TOEEnabledState
An integer enumeration that indicates the enabled and disabled states of the TOE.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Enabled — Indicates that the TOE is enabled and running.
• 3 = Disabled — Indicates that the TOE is disabled.
• 4 = Not Applicable — Indicates that the ethernet port does not have TOE capability.
• 5..32767 = DMTF Reserved
• 32768..65535 = Vendor Reserved
46 Dell Command | Monitor 10.3 classes and properties