Reference Guide

Property Description
• 3 = Disabled — Indicates that the element will not execute commands and will drop
any new requests.
• 4 = Shutting Down — Indicates that the element is in the process of going to a
Disabled state.
• 5 = Not Applicable — Indicates the element does not support being enabled or
disabled.
• 6 = Enabled but Offline — Indicates that the element may be completing commands,
and will drop any new requests.
• 7 = In Test — Indicates that the element is in a test state.
• 8 = Deferred — Indicates that the element may be completing commands, but will
queue any new requests.
• 9 = Quiesce — Indicates that the element is enabled but in a restricted mode.
• 10 = Starting — Indicates that the element is in the process of going to an Enabled
state. New requests are queued.
• 11..32767 = DMTF Reserved
• 32768..65535 = Vendor Reserved
Name
A string that identifies this ProtocolEndpoint with either a port or an interface on a
device. To ensure uniqueness, the Name property should be prepended or appended
with information from the Type or OtherTypeDescription properties. The method
selected is described in the NameFormat property of this class.
NameFormat
Contains the naming heuristic that is selected to ensure that the value of the Name
property is unique. For example, you may choose to prepend the name of the port or
interface with the Type of ProtocolEndpoint (for example, IPv4) of this instance followed
by an underscore.
OtherTypeDescription
A string that describes the type of ProtocolEndpoint when the Type property of this
class (or any of its subclasses) is set to 1 (Other). This property should be set to null
when the Type property is any value other than 1.
ProtocolIFType
An enumeration that is synchronized with the IANA ifType MIB. The ifType MIB is
maintained at the URL, iana.org/assignments/ianaiftype-mib. Also, additional values
defined by the DMTF are included. The property is used to categorize and classify
instances of the ProtocolEndpoint class.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Regular 1822
• 3 = HDH 1822
• 4 = DDN X.25
• 5 = RFC877 X.25
• 6 = Ethernet CSMA/CD
• 7 = ISO 802.3 CSMA/CD
• 8 = ISO 802.4 Token Bus
• 9 = ISO 802.5 Token Ring
• 10 = ISO 802.6 MAN
• 11 = StarLAN
• 12 = Proteon 10Mbit
• 13 = Proteon 80Mbit
• 14 = HyperChannel
• 15 = FDDI
• 16 = LAP-B
• 17 = SDLC
• 18 = DS1
• 19 = E1
• 20 = Basic ISDN
38
Dell Command | Monitor 10.3 classes and properties