Reference Guide

BIOS Settings Name Description Supported
Operating
System(s)
• Disabled
• Enabled
Wireless Switch WLAN-WIGIG Control
Enables or Disables the effect of physical wireless switch on
wireless LAN and WiGig radio.
Possible values are:
• Disabled — The wireless physical switch does not affect the
wireless LAN and WiGig radios.
• Enabled — If the wireless physical switch is on, turns the
wireless LAN on and WiGig radio on. If the wireless switch is
off, turns the wireless LAN on and WiGig radio off.
Windows, Linux
Wireless UWB
Enabled/Disabled UWB card.
Possible values are:
• Disabled
• Enabled
Windows
WLAN Region Code
Sets the WLAN code for specific region.
Possible values are:
• 0 = Rest of the World — Sets the WLAN region code for
the rest of the world. This option is selected by default.
• 1 = North America (FCC) — Sets the WLAN region code for
Canada, and the United States.
• 2 = Europe — Sets the WLAN region code for Australia,
Belgium, Czech Republic, Denmark, Finland, France,
Germany, Ireland, Italy, Luxembourg, Netherlands, Norway,
Poland, Portugal, Slovakia, Spain, Sweden, Switzerland,
Turkey, and United Kingdom.
• 3 = Japan — Sets the WLAN region code for Japan only.
• 4 = Australia — Sets the WLAN region code for Australia,
New Zealand, Saudi Arabia, South Africa, UAE, and Vietnam.
• 5 = China South Asia — Sets the WLAN region code for
China, and India.
• 6 = Taiwan — Sets the WLAN region code for Colombia,
Peru, and Taiwan.
• 7 = Indonesia — Sets the WLAN region code for Indonesia
only.
Windows, Linux
WWAN Radio
Configures the WWAN radio.
Possible values are:
• Disabled
• WLAN on
• WWAN on
• If set to Disabled then it Disables both WLAN and WWAN;
• If set to WLAN ON then it toggles between WLAN radio on
and WWAN radio off;
• If set to WWAN ON then it toggles between WWAN radio
on and WLAN radio off.
Windows, Linux
Wireless Switch GPS On WWAN Radio
Enables or Disables the effect of physical wireless switch on the
GPS radio of the wireless WAN card.
Possible values are:
Windows, Linux
BIOS settings supported in Dell Command | Monitor 10.3 305