Reference Guide

BIOS Settings Name Description Supported
Operating
System(s)
• 2 - Standard
• 3- Express
• 4- PrimAcUse
• 5- Custom
BIOS Connect
Enables or Disables the BIOS Connect feature.
Possible values are:
• Enabled
• Disabled
Windows, Linux
BIOS Connect Activation
Configures the state of the available BiosConnect boot paths.
Possible values are:
• 0 — Deactivate — BIOS setup options are not available and
all BiosConnect boot paths are Disabled.
• 1 — Full Activation — BIOS Setup options are Enabled and
all BiosConnect boot paths are Enabled.
• 2 — Launchpad Activation Only — BIOS setup options are
Enabled and only launchpad code path is Enabled.
Windows, Linux
BIOS Enumeration Mode BIOS Assist Enumeration, Native Enumeration
Possible values are: 0,1
Windows, Linux
Bios Integrity Check
Enables or Disables the BIOS integrity check during the booting
process.
Possible values are:
• Enabled — BIOS checks the BIOS image integrity during
every booting process.
• Disabled — BIOS checks the BIOS image integrity only if the
previous booting process did not complete.
NOTE: BIOS checks the BIOS image integrity only if
the biosautorecovery option is Enabled.
Windows, Linux
BIOS Recovery
Enables or Disables the system BIOS Recovery option. This
feature saves a recovery image to a primary hard disk drive
storage, or to an external USB, and uses this recovery image to
recover BIOS image when system BIOS fails.
Possible values are:
• Enabled — BIOS stores the recovery image on primary hard
disk drive storage. So BIOS recovery image is available both
from primary hard disk drive permanent storage and via an
external USB.
• Disabled — BIOS does not store the recovery image on
primary hard disk drive storage. So BIOS recovery image is
available only via an external USB.
Windows, Linux
Bitsmart
Enables or Disabled the Bitsmart.
Possible values are:
• Disabled
• Enabled
Windows
Bluetooth Devices
Enabled or Disabled Bluetooth Devices
Possible values are:
Windows, Linux
250 BIOS settings supported in Dell Command | Monitor 10.3