Reference Guide

DCIM_LogManagesRecord
Table 142. LogManagesRecord
Property Description
Log
The Log.
Record
The record managed by the Log.
DCIM_InstalledSoftwareIdentity
Table 143. InstalledSoftwareIdentity
Property Description
InstalledSoftware
The SoftwareIdentity that is installed.
System
The system on which the software is installed.
DCIM_ConcreteIdentity
Table 144. ConcreteIdentity
Property Description
SameElement
SameElement Another aspect of the ManagedElement.
SystemElement
One aspect of the ManagedElement. The use of 'System' in the name does not limit the
scope of the association. This name is an artifact of the original definition of the association.
DCIM_SMARTAttributeInfo
Table 145. SMARTAttributeInfo
Property Description
AttributeID AttributeID represents the relative reliability of individual performance or
calibration attributes. The valid range of attribute values begins from 1–253
decimal.
AttributeName Name defined for the corresponding AttributeID.
CurrentValue
Current value of an attribute which represents the relative reliability of
individual performance or calibration attributes.
CustomThresholdValue
Each attribute has a corresponding Custom Threshold Value which is
used for direct comparison to the Current Value to indicate the existence
of a degrading or faulty condition. The numerical value of the Custom
Threshold Value is determined by the IT administrator and set the value
lesser than the Threshold Value set by the Manufacturer. The valid range
for Attribute Thresholds is from 1–253 decimal.
DiskID Disk ID of the HDD/SSD.
FirmwareVersion Firmware Version of the HDD/SSD.
Manufacturer HDD/SSD Manufacturer.
ModelNumber HDD/SSD Model Number.
238 Dell Command | Monitor 10.3 classes and properties