Reference Guide

Property Description
• 11 = Diagnostic Interrupt (NMI)
• 12 = Off - Soft Graceful
• 13 = Off - Hard Graceful
• 14 = Master Bus Reset Graceful
• 15 = Power Cycle (Off - Soft Graceful)
• 16 = Power Cycle (Off - Hard Graceful)
• .. = DMTF Reserved
• 0x7FFF..0xFFFF = Vendor Specific
RequestedPowerState
The desired or the last requested power state of the associated Managed System Element,
irrespective of the mechanism through which the request was made. If the requested power
state is unknown, then the property has the value of 0 Unknown. If the property has no
meaning or is not supported, then the property has the value 12 Not Applicable.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = On
• 3 = Sleep - Light
• 4 = Sleep -_Deep
• 5 = Power Cycle (Off - Soft)
• 6 = Off - Hard
• 7 = Hibernate (Off - Soft)
• 8 = Off - Soft
• 9 = Power Cycle (Off-Hard)
• 10 = Master Bus Reset
• 11 = Diagnostic Interrupt (NMI)
• 12 = Not Applicable
• 13 = Off - Soft Graceful
• 14 = Off - Hard Graceful
• 15 = Master Bus Reset Graceful
• 16 = Power Cycle (Off - Soft Graceful)
• 17 = Power Cycle (Off - Hard Graceful)
• .. = DMTF Reserved
• 0x7FFF..0xFFFF = Vendor Specific
ServiceProvided
The Service that is available.
UserOfService
The ManagedElement that can use the Service.
DCIM_ServiceAvailableToElement
Table 141. ServiceAvailableToElement
Property Description
ServiceProvided
The Service that is available.
UserOfService
The ManagedElement that can use the Service.
Dell Command | Monitor 10.3 classes and properties 237