Reference Guide

Property Description
• 3 = Performance Impact — Deprecated in favor of Consumes, Enhances
Performance, or Degrades Performance. Execution of the Service may enhance or
degrade the performance of the element. This may be as a side-effect of execution or
as an intended consequence of methods provided by the Service.
• 4 = Element Integrity — Deprecated in favor of Consumes, Enhances Integrity, or
Degrades Integrity. Execution of the Service may enhance or degrade the integrity of
the element. This may be as a side-effect of execution or as an intended consequence
of methods provided by the Service.
• 5 = Manages — The Service manages the element.
• 6 = Consumes — Execution of the Service consumes some or all of the associated
element as a consequence of running the Service. For example, the Service may
consume CPU cycles, which may affect performance, or Storage which may affect
both performance and integrity. (For instance, the lack of free storage can degrade
integrity by reducing the ability to save state. ) Consumes may be used alone or in
conjunction with other values, in particular, Degrades Performance and Degrades
Integrity. Manages and not Consumes should be used to reflect allocation services
that may be provided by a Service.
• 7 = Enhances Integrity — The Service may enhance integrity of the associated
element.
• 8 = Degrades Integrity — The Service may degrade integrity of the associated element.
• 9 = Enhances Performance — The Service may enhance performance of the
associated element.
• 10 = Degrades Performance — The Service may degrade performance of the
associated element.
• .. = DMTF Reserved
• 0x8000..0xFFFF = Vendor Reserved
OtherElementEffectsDescriptions
Provides details for the effect at the corresponding array position in ElementEffects. This
information is required if ElementEffects contains the value 1 (Other).
DCIM_AssociatedPowerManagementService
Table 140. AssociatedPowerManagementService
Property Description
OtherPowerState
A string describing the additional power management state of the element, used when the
PowerState is set to the value 1, Other.
OtherRequestedPowerState
A string describing the additional power management state of the element, used when the
RequestedPowerState is set to the value 1, Other.
PowerOnTime
The time when the element will be powered on again, used when the RequestedPowerState
has the value 2, On, 5, Power Cycle (Off - Soft) or 6, Power Cycle (Off - Hard).
PowerState
The current power state of the associated Managed System Element.
Possible values are:
• 1 = Other
• 2 = On
• 3 = Sleep - Light
• 4 = Sleep -Deep
• 5 = Power Cycle (Off - Soft)
• 6 = Off - Hard
• 7 = Hibernate (Off - Soft)
• 8 = Off - Soft
• 9 = Power Cycle (Off-Hard)
• 10 = Master Bus Reset
236 Dell Command | Monitor 10.3 classes and properties