Reference Guide

DCIM_OrderedMemberOfCollection
Table 133. OrderedMemberOfCollection
Property Description
AssignedSequence
AssignedSequence is an unsigned integer n that indicates the relative position of members
within a Collection. When n is a positive integer, it indicates a place in the sequence of
members, with smaller integers indicating earlier positions in the sequence. The special
value 0 indicates don't care. If two or more members have the same non-zero sequence
number, then the ordering between those members is irrelevant, but they must all be
ordered at the appropriate place in the overall sequence. A series of examples will make
ordering of members clearer: If all members have the same sequence number, regardless of
whether it is 0 or non-zero, any order is acceptable. The values are: 1:MEMBER A
2:MEMBER B 1:MEMBER C 3:MEMBER D indicate two acceptable orders: A,C,B,D or
C,A,B,D, because A and C can be ordered in either sequence, but only at the 1 position.
NOTE: The non-zero sequence numbers do not need to start with 1, and they
do not need to be consecutive. However, the sequence numbers must reflect
their relative magnitude.
Collection
The Collection that aggregates members.
Member
The aggregated member of the Collection.
DCIM_MemberOfCollection
Table 134. MemberOfCollection
Property Description
Collection
The Collection that aggregates members.
Member
The aggregated member of the Collection.
DCIM_OwningCollectionElement
Table 135. OwningCollectionElement
Property Description
OwnedElement
The Collection owned or controlled by the ManagedElement.
OwningElement
The ManagedElement acting as the 'owner' or object that is responsible for the control of
the Collection.
DCIM_ElementConformsToProfile
Table 136. ElementConformsToProfile
Property Description
ConformantStandard
The RegisteredProfile to which the ManagedElement conforms.
ManagedElement
The ManagedElement that conforms to the RegisteredProfile.
234 Dell Command | Monitor 10.3 classes and properties