Reference Guide

Property Description
• 1 = Other
• 2 = Instruction
• 3 = Data
• 4 = Unified
Dependent
The LogicalElement.
ReadPolicy
Policy that is employed by the Cache for handling read requests. For example, Read, Read-
Ahead or both can be specified using the values, 2, 3 or 4, respectively. If the read policy is
determined individually (ie, for each request), then the value 5 (Determination per I/O)
should be specified. Other (1) and Unknown (0) are also valid values.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Read
• 3 = Read-Ahead
• 4 = Read and Read-Ahead
• 5 = Determination Per I/O
WritePolicy
Defines whether this is write-back (value = 2) or write-through (value = 3) Cache, or
whether this information Varies with Address (4) or is defined individually for each I/O
(5). Also, Other and Unknown (0) can be specified.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Read
• 3 = Read-Ahead
• 4 = Read and Read-Ahead
• 5 = Determination Per I/O
DCIM_AssociatedSensor
Table 126. AssociatedSensor
Property Description
Antecedent
The Sensor.
Dependent
The ManagedSystemElement for which information is measured by the Sensor.
DCIM_RemoteAccessAvailableToElement
Table 127. RemoteAccessAvailableToElement
Property Description
Antecedent
The remote server or system.
Dependent
The EnabledLogicalElement which has knowledge of the remote server or system.
IsDefault
Indicates that this access information is defined as a default configuration for the system.
OrderOfAccess
When an element is accessing remote services and systems, it MAY be necessary to order
those accesses. This property defines that ordering — where lower numbers indicate a
higher priority for access. A value of 0 (default) indicates that ordering does not apply. If
230 Dell Command | Monitor 10.3 classes and properties