Reference Guide

DCIM_ConfigurationCapacity
Table 91. ConfigurationCapacity
Property Description
ElementName
A user-friendly name for the object. This property allows each instance to define a user-
friendly name in addition to its key properties, identity data, and description information.
NOTE: The Name property of ManagedSystemElement is also defined as a
user-friendly name. But, it is often subclassed to be a Key. It is not reasonable
that the same property can convey both identity and a user-friendly name,
without inconsistencies. Where Name exists and is not a Key (such as for
instances of LogicalDevice), the same information can be present in both the
Name and ElementName properties.
Increment
Increment in which Elements must be added or removed.
MaximumCapacity
Maximum number of Elements of type, ObjectType, that may be installed.
Name
The inherited Name serves as a part of the Configuration Capacity object key.
ObjectType
The type of object (power supply, fan, disk drive, ...) whose capacities are indicated. This
information is part of the class' key.
Possible values are:
• 0 = Other
• 1 = Processors
• 2 = Power Supplies
• 3 = Fans
• 4 = Batteries
• 5 = I/O Slots
• 6 = Memory Slots
• 7 = MediaAccessDevices (Drives)
• 8 = StorageMediaLocation Slots
• 9 = StorageMediaLocation Magazines
• 10 = StorageMediaLocation Panels
• 11 = StorageMediaLocation InterLibrary Ports
• 12 = StorageMediaLocation Limited Access Ports
• 13 = Doors
• 14 = MediaTransferDevice Pickers
• 15 = MediaTransferDevice Changers
• 16 = LabelReaders
• 17 = Contained Chassis
• 18 = Connected Chassis
• 19 = Connected Frames
• 20 = Front Side I/O Slots
• 21 = Back Side I/O Slots
• 22 = Cache Memory
• 23 = NVS Memory
• 24 = Volatile Memory
• 25 = Multi-Purpose
UsedCapacity
This property defines the total capacity in use.
VendorCompatibilityStrings
An array of strings that identifies the compatibility of the elements within the configuration
capacity. This allows vendors to provide information to the system administrators by
providing sufficient information to request the appropriate hardware that can populate the
configuration. In order to ensure uniqueness within the NameSpace, each value defined by
Dell Command | Monitor 10.3 classes and properties 217