Reference Guide

Property Description
10 = Ethernet Adapter
11 = Other Network Adapter
12 = I/O Slot
13 = I/O Device
14 = Floppy Drive
15 = CD Drive
16 = DVD drive
17 = Disk Drive
18 = Tape Drive
19 = Storage Extent
20 = Other Storage Device
21 = Serial port
22 = Parallel port
23 = USB Controller
24 = Graphics controller
25 = IEEE 1394 Controller
26 = Partitionable Unit
27 = Base Partitionable Unit
28 = Power
29 = Cooling Capacity
30 = Ethernet Switch Port
31 = Logical Disk
32 = Storage Volume
33 = Ethernet Connection
.. = DMTF reserved
0x8000..0xFFFF = Vendor Reserved
SharingMode
Indicates how access to underlying resource is granted.
Possible values are:
0 = Unknown
1 = Other
2 = Dedicated — Exclusive access to underlying resource
3 = Shared — Shared use of underlying resource.
.. = DMTF reserved
0x8000..0xFFFF = Vendor Reserved
Actual quantity is controlled by min, max size, weights, and so on.
DCIM_BIOSServiceCapabilities
Table 85. BIOSServiceCapabilities
Property Description
InstanceID
Within the scope of the instantiating Namespace, InstanceID opaquely and uniquely
identifies an instance of this class. In order to ensure uniqueness within the NameSpace,
the value of InstanceID SHOULD be constructed using the following preferred algorithm:
<OrgID> : <LocalID> Where <OrgID>and <LocalID> are separated by a colon ':', and where
<OrgID> MUST include a copyrighted, trademarked or otherwise unique name that is
owned by the business entity creating/defining the InstanceID, or is a registered ID that is
assigned to the business entity by a recognized global authority (This is similar to the
<Schema Name>_<Class Name> structure of Schema class names.) In addition, to ensure
uniqueness <OrgID> MUST NOT contain a colon (':'). When using this algorithm, the first
colon to appear in InstanceID MUST appear between <OrgID>and <LocalID>. <LocalID> is
chosen by the business entity and SHOULD not be re-used to identify different underlying
(real-world) elements. If the above preferred algorithm is not used, the defining entity
Dell Command | Monitor 10.3 classes and properties 211