Reference Guide

Property Description
• 21 = Storage Virtualizer
• 22 = Media Library
• 23 = ExtenderNode
• 24 = NAS Head
• 25 = Self-contained NAS
• 26 = UPS
• 27 = IP Phone
• 28 = Management Controller — Indicates this instance represents specialized hardware
dedicated to systems management (i.e., a Baseboard Management Controller (BMC) or
service processor).
• 29 = Chassis Manager — Indicates this instance represents a system dedicated to
management of a blade chassis and its contained devices. This value would be used to
represent a Shelf Controller. A Chassis Manager is an aggregation point for
management and may rely on subordinate management controllers for the management
of constituent parts.
• 30 = Host-based RAID controller — Indicates this instance represents a RAID storage
controller contained within a host computer.
• 31 = Storage Device Enclosure — Indicates this instance represents an enclosure that
contains storage devices.
• 32 = Desktop
• 33 = Laptop
• 34 = Virtual Tape Library — Is the emulation of a tape library by a Virtual Library
System.
• 35 = Virtual Library System — Uses disk storage to emulate tape libraries.
• 36..32567 = DMTF Reserved
• 32568..65535 = Vendor Reserved
ElementName
A user-friendly name for the object. This property allows each instance to define a user-
friendly name in addition to its key properties, identity data, and description information.
NOTE: The Name property of ManagedSystemElement is also defined as a
user-friendly name. But, it is often subclassed to be a Key. It is not reasonable
that the same property can convey both identity and a user-friendly name,
without inconsistencies. Where Name exists and is not a Key (such as for
instances of LogicalDevice), the same information can be present in both the
Name and ElementName properties.
EnabledDefault
An enumerated value indicating an administrator's default or startup configuration for the
Enabled State of an element.
Possible values are:
• 2 = Enabled
• 3 = Disabled
• 5 = Not Applicable
• 6 = Enabled but Offline
• 7 = No Default
• 9 = Quiesce
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
By default, the element is Enabled (value = 2).
EnabledState
An integer enumeration that indicates the enabled and disabled states of an element. It can
also indicate the transitions between these requested states. For example, shutting down
(value = 4) and starting (value = 10) are transient states between enabled and disabled.
Possible values are:
• 0 = Unknown
• 1 = Other
Dell Command | Monitor 10.3 classes and properties 163