Reference Guide

Property Description
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable — Indicates the implementation does not support representing
ongoing transitions.
A value other than 5 or 12 identifies the state to which the element is in the process of
transitioning.
DCIM_ComputerSystem
Table 47. ComputerSystem
Property Description
CreationClassName
Indicates the name of the class or the subclass used in the creation of an instance. When
used with the other key properties of this class, this property allows all instances of this
class and its subclasses to be uniquely identified.
Dedicated
Enumeration indicating the purpose(s) for which the ComputerSystem is dedicated, if any,
and the functionality provided. For example, one could specify that the System is dedicated
to Print (value = 11) or acts as a Hub (value = 8).
Also, a value = 0 indicates this is a general purpose system, Not Dedicated but that it also
hosts Print (value = 11) or mobile phone Mobile User Device (value = 17) services.
A clarification is needed with respect to the value 17 (Mobile User Device). An example of
a dedicated user device is a mobile phone or a barcode scanner in a store that
communicates via radio frequency. These systems are quite limited in functionality and
programmability, and are not considered general purpose computing platforms.
Alternately, an example of a mobile system that is general purpose (that is, is NOT
dedicated) is a hand-held computer. Although limited in its programmability, new software
can be downloaded and its functionality expanded by the user.
The management scope of a Management Controller is typically a single managed system
in which it is contained.
Possible values are:
• 0 = Not Dedicated
• 1 = Unknown
• 2 = Other
• 3 = Storage
• 4 = Router
• 5 = Switch
• 6 = Layer 3 Switch
• 7 = Central Office Switch
• 8 = Hub
• 9 = Access Server
• 10 = Firewall
• 11 = Print
• 12 = I/O
• 13 = Web Caching
• 14 = Management — Indicates this instance is dedicated to hosting system
management software.
• 15 = Block Server
• 16 = File Server
• 17 = Mobile User Device
• 18 = Repeater
• 19 = Bridge/Extender
• 20 = Gateway
162
Dell Command | Monitor 10.3 classes and properties