Reference Guide

Property Description
• 2 = Enabled — Indicates that the element is or could be executing commands, will
process any queued commands, and queues new requests.
• 3 = Disabled — Indicates that the element will not execute commands and will drop any
new requests.
• 4 = Shutting Down — Indicates that the element is in the process of going to a Disabled
state.
• 5 = Not Applicable — Indicates the element does not support being enabled or disabled.
• 6 = Enabled but Offline — Indicates that the element may be completing commands,
and will drop any new requests.
• 7 = In Test — Indicates that the element is in a test state.
• 8 = Deferred — Indicates that the element may be completing commands, but will
queue any new requests.
• 9 = Quiesce — Indicates that the element is enabled but in a restricted mode.
• 10 = Starting — Indicates that the element is in the process of going to an Enabled
state. New requests are queued.
• 11..32767 = DMTF Reserved
• 32768..65535 = Vendor Reserved
For example, shutting down (value = 4) and starting (value = 10) are transient states
between enabled and disabled.
RequestedState
An integer enumeration that indicates the last requested or desired state for the element,
irrespective of the mechanism through which it was requested. The actual state of the
element is represented by EnabledState. This property is provided to compare the last
requested and current enabled or disabled states.
Possible values are:
• 0 = Unknown — Indicates the last requested state for the element is unknown.
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change
• 6 = Offline - Indicates that the element has been requested to transition to the Enabled
but Offline EnabledState.
• 7 = Test
• 8 = Deferred
• 9 = Quiesce
• 10 = Reboot - Refers to doing a Shut Down and then moving to an Enabled state.
• 11 = Reset — Indicates that the element is first Disabled and then Enabled.
• 12 = Not Applicable
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
NOTE: When EnabledState is set to 5 (Not Applicable), then this property has
no meaning. Refer to the EnabledState property description for explanations
of the values in the RequestedState enumeration.
NOTE: The value No Change (5) has been deprecated instead of indicating the
last requested state is Unknown (0). If the last requested or desired state is
unknown, RequestedState should have the value Unknown (0), but may have
the value No Change (5).
There are two new values in RequestedState that build on the statuses of EnabledState.
These are Reboot (10) and Reset (11).
Shut Down requests an orderly transition to the Disabled state, and may involve removing
power, to completely erase any existing state. The Disabled state requests an immediate
disabling of the element, such that it will not execute or accept any commands or
processing requests.
136
Dell Command | Monitor 10.3 classes and properties