Reference Guide

Property Description
• 5 = No Change — Indicates that no transition is in progress.
• 6 = Offline
• 7 = Test
• 8 = Defer
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable — Indicates the implementation does not support representing
ongoing transitions.
A value other than 5 or 12 identifies the state to which the element is in the process of
transitioning.
DCIM_VideoHead
Table 34. VideoHead
Property Description
Caption
The Caption property is a short textual description (one- line string) of the object.
CreationClassName
Indicates the name of the class or the subclass used in the creation of an instance. When
used with the other key properties of this class, this property allows all instances of this
class and its subclasses to be uniquely identified.
CurrentBitsPerPixel
The number of bits used to display each pixel.
CurrentHorizontalResolution
Current number of horizontal pixels.
CurrentNumberOfColumns
If in character mode, number of columns for this DisplayController. Otherwise, enter 0.
CurrentNumberOfRows
If in character mode, number of rows for this Video Controller. Otherwise, enter 0.
CurrentScanMode
Current scan mode.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Not Supported
• 3 = Non-Interlaced Operation
• 4 = Interlaced Operation
CurrentVerticalResolution
Current number of vertical pixels.
Description
Provides a textual description of the object.
DeviceID
An address or other identifying information used to uniquely name the LogicalDevice.
ElementName
A user-friendly name for the object. This property allows each instance to define a user-
friendly name in addition to its key properties, identity data, and description information.
NOTE: The Name property of ManagedSystemElement is also defined as a
user-friendly name. But, it is often subclassed to be a Key. It is not reasonable
that the same property can convey both identity and a user-friendly name,
without inconsistencies. Where Name exists and is not a Key (such as for
instances of LogicalDevice), the same information can be present in both the
Name and ElementName properties.
EnabledDefault
An enumerated value indicating an administrator's default or startup configuration for the
Enabled State of an element.
132 Dell Command | Monitor 10.3 classes and properties