Reference Guide

Property Description
disabling of the element, such that it will not execute or accept any commands or
processing requests.
This property is set as the result of a method invocation (such as Start or StopService on
CIM_Service), or can be overridden and defined as WRITEable in a subclass. The method
approach is considered superior to a WRITEable property, because it allows an explicit
invocation of the operation and the return of a result code.
If knowledge of the last RequestedState is not supported for the EnabledLogicalElement,
the property is NULL or has the value 12 Not Applicable.
SmartBatteryVersion
The Smart Battery Data Specification version number that is supported by this Battery. If
the Battery does not support this function, the value should be left blank.
Status
A string indicating the current status of the object. Various operational and non-operational
statuses are defined. This property is deprecated instead of OperationalStatus, which
includes the same semantics in its enumeration. This change is made for three reasons:
1. Status is more correctly defined as an array. This definition overcomes the limitation of
describing status using a single value, when it is really a multi-valued property (for
example, an element may be OK AND Stopped.
2. A MaxLen of 10 is too restrictive and leads to unclear enumerated values.
3. The change to a uint16 data type was discussed when CIM V2.0 was defined. However,
existing V1.0 implementations used the string property and did not want to modify their
code. Therefore, Status was grandfathered into the Schema. Use of the deprecated
qualifier allows the maintenance of the existing property, but also permits an improved
definition using OperationalStatus.
Possible values are:
• OK
• Error
• Degraded
• Unknown
• Pred Fail
• Starting
• Stopping
• Service
• Stressed
• NonRecover
• No Contact
• Lost Comm
• Stopped
SystemCreationClassName
The CreationClassName of the scoping system.
SystemName
The System Name of the scoping system.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change — Indicates that no transition is in progress.
• 6 = Offline
• 7 = Test
• 8 = Defer
• 9 = Quiesce
• 10 = Reboot
Dell Command | Monitor 10.3 classes and properties 107