Reference Guide

Property Description
invocation (such as Start or StopService on CIM_Service), or can be overridden and
defined as WRITEable in a subclass. The method approach is considered superior to a
WRITEable property, because it allows an explicit invocation of the operation and the return
of a result code.
If knowledge of the last RequestedState is not supported for the EnabledLogicalElement,
the property is NULL or has the value 12 Not Applicable.
SystemCreationClassName
The CreationClassName of the scoping system.
SystemName
The System Name of the scoping system.
TotalOutputPower
Represents the total output power of the PowerSupply in milli Watts. 0 denotes unknown.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change — Indicates that no transition is in progress.
• 6 = Offline
• 7 = Test
• 8 = Defer
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable — Indicates that the implementation does not support representing
ongoing transitions.
A value other than 5 or 12 identifies the state to which the element is in the process of
transitioning.
TypeOfRangeSwitching
Describes the kind of input voltage range switching that is implemented in this
PowerSupply.
Possible values are:
• 1 = Other
• 2 = Unknown
• 3 = Manual
• 4 = Autoswitch
• 5 = Wide Range
• 6 = Not Applicable
A value other than 5 or 12 identifies the state to which the element is in the process of
transitioning.
DCIM_Battery
Table 29. Battery
Property Description
BatteryStatus
Description of the charge status of the Battery.
Possible values are:
• 1 = Other
• 2 = Unknown
102 Dell Command | Monitor 10.3 classes and properties