Reference Guide

Property Description
sRGBStandardDefaultColorSpace
If this bit is set to 1, the display uses the sRGB standard default
color space as its primary color space.
StandbyModeSupported
This property represents if the video output device can go into a
stand by mode.
Possible values are:
• 0 = Unknown
• 2 = Supported
• 3 = Not Supported
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
SuspendModeSupported
This property represents if the video output device can go into a
suspend mode.
Possible values are:
• 0 = Unknown
• 2 = Supported
• 3 = Not Supported
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
SystemCreationClassName
The creation class name of the scoping system.
SystemName
The system name of the scoping system.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change — Indicates that no transition is in progress.
• 6 = Offline
• 7 = Test
• 8 = Defer
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable — Indicates that the implementation does
not support representing ongoing transitions.
A value other than 5 or 12 identifies the state to which the element
is in the process of transitioning.
VeryLowPowerSupported
This property represents if the video output device can go into a
low power mode.
Possible values are:
• 0 = Unknown
• 2 = Supported
• 3 = Not Supported
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
36 Dell Command | Monitor 10.2.1 classes and properties