Reference Guide

Property Description
Associativity
An integer enumeration defining the system cache associativity. For example, 5 indicates a
fully associative cache.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Direct Mapped
• 3 = 2-way Set-Associative
• 4 = 4-way Set-Associative
• 5 = Fully Associative
• 6 = 8-way Set-Associative
• 7 = 16-way Set-Associative
CacheType
Defines whether this is for instruction caching (value = 2), data caching (value = 3) or both
(value = 4, Unified). Also, Other (1) and Unknown (0) can be defined.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Instruction
• 3 = Data
• 4 = Unified
Dependent
The LogicalElement.
ReadPolicy
Policy that is employed by the Cache for handling read requests. For example, Read, Read-
Ahead or both can be specified using the values, 2, 3 or 4, respectively. If the read policy is
determined individually (ie, for each request), then the value 5 (Determination per I/O)
should be specified.
Other (1) and Unknown (0) are also valid values.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Read
• 3 = Read-Ahead
• 4 = Read and Read-Ahead
• 5 = Determination Per I/O
WritePolicy
Defines whether this is write-back (value = 2) or write-through (value = 3) Cache, or
whether this information Varies with Address (4) or is defined individually for each I/O
(5). Also, Other and Unknown (0) can be specified.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Read
• 3 = Read-Ahead
• 4 = Read and Read-Ahead
• 5 = Determination Per I/O
DCIM_AssociatedSensor
Table 125. AssociatedSensor
Property Description
Antecedent
The Sensor.
Dell Command | Monitor 10.2.1 classes and properties 229