Reference Guide

Property Description
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable — Indicates that the implementation does
not support representing ongoing transitions.
A value other than 5 or 12 identifies the state to which the element
is in the process of transitioning.
DCIM_ImprovementProgramConsent
Table 12. ImprovementProgramConsent
Property Description
CurrentValue CurrentValue displays the User's Consent to participate in the Dell
Command | Monitor improvement program.
NOTE: Improvement Program is available for DCM 10.2.1
x64 bit version only.
OverrideImprovementProgramConsent (Method)
This method sets the User consent for the Dell Command | Monitor
improvement program.
Parameters and the current value:
• 0 - I don't want to participate in the program
• 1 - I want to participate in the program
NOTE: Default Value is 0 (By default, you are not
enrolled in Improvement Program).
Return Values:
• A return code of 0 indicates that the user consent was updated
successfully
• A return code of 1 indicates that the user consent was not
updated successfully
DCIM_ControllerView
Table 13. ControllerView
Property Description
BusType
The property represents the type of the PCI bus.
Possible values are:
• 0 =Unknown
• 3 = PCI Bus
• 4 = PCMCIA Bus
• 0x8000 = DMTF Reserved
• 0xffff = Vendor Reserved
ControllerFirmwareVersion
This property represents the firmware version.
Device
This property represents the device name.
Driver Version
This property represents the version of the driver.
ElementName
A user-friendly name for the object. This property allows each instance to
define a user-friendly name in addition to its key properties, identity data,
and description information.
54 Dell Command | Monitor 10.2.1 classes and properties