Reference Guide

Property Description
• 10 = Starting — Indicates that the element is in the process of
going to an Enabled state. New requests are queued.
• 11..32767 = DMTF Reserved
• 32768..65535 = Vendor Reserved
FrequencyH
This property is a horizontal synchronization signal frequency in Hz
as determined by the display.
FrequencyV
This property is a vertical synchronization signal frequency in Hz as
determined by the display.
HealthState
Indicates the current health of the element. This attribute
expresses the health of this element but not necessarily that of its
subcomponents.
Possible values are:
• 0 = Unknown — The implementation cannot report on
HealthState now. DMTF has reserved the unused portion of
the continuum for additional HealthStates in the future.
• 5 = OK — The element is fully functional and is operating
within normal operational parameters and without error.
• 10 = Degraded/Warning — The element is in working order and
all functionality is provided. However, the element is not
working to the best of its abilities. For example, the element
may not be operating at optimal performance or it may be
reporting recoverable errors.
• 15 = Minor failure — All functionality is available but some may
be degraded.
• 20 = Major failure — The element is failing. It is possible that
some or all of the functionality of this component is degraded
or not working.
• 25 = Critical failure — The element is nonfunctional and
recovery may not be possible.
• 30 = Non-recoverable error — The element has failed, and
recovery is not possible. All functionality provided by this
element has been lost.
• .. = DMTF Reserved
IdentifyingDescriptions
An array of free-form strings providing explanations and details
behind the entries in the OtherIdentifyingInfo array. Each entry of
this array is related to the entry in OtherIdentifyingInfo that is
located at the same index.
InputAnalog
Input is an analog video signal interface.
InputDigital
Input is a digital video signal interface.
InputDisplayPort
DisplayPort is supported.
InputDVI
DVI is supported.
InputHDMI
HDMI is supported.
InputSource
An enumerated value identifying the current input source. Writing a
new value into this property changes the device's input source to
the specified value, if the value is supported as specified in
InputSourceCapabilities. If the requested value is not in
InputSourceCapabilities, then the current value of InputSource is
unchanged.
Possible values are:
Dell Command | Monitor 10.2.1 classes and properties 31