Reference Guide

Property Description
LogicalDevice), the same information can be present in both the Name and
ElementName properties.
EnabledDefault
An enumerated value indicating an administrator's default or startup configuration for the Enabled
State of an element.
Possible values are:
• 2 = Enabled
• 3 = Disabled
• 5 = Not Applicable
• 6 = Enabled but Offline
• 7 = No Default
• 9 = Quiesce
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
By default, the element is Enabled (value = 2).
EnabledState
An integer enumeration that indicates the enabled and disabled states of an element. It can also
indicate the transitions between these requested states. For example, shutting down (value = 4)
and starting (value = 10) are transient states between enabled and disabled.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Enabled — Indicates that the element is or could be executing commands, will process any
queued commands, and queues new requests.
• 3 = Disabled — Indicates that the element does not run commands and will drop any new
requests.
• 4 = Shutting Down — Indicates that the element is in the process of moving to a Disabled state.
• 5 = Not Applicable — Indicates the element does not support being enabled or disabled.
• 6 = Enabled but Offline — Indicates that the element may be completing commands, and will
drop any new requests.
• 7 = In Test — Indicates that the element is in a test state.
• 8 = Deferred — Indicates that the element may be completing commands, but will queue any
new requests.
• 9 = Quiesce — Indicates that the element is enabled but in a restricted mode. Starting (10)
indicates that the element is in the process of going to an Enabled state. New requests are
queued.
• 10 = Starting
• 11..32767 = DMTF Reserved
• 32768..65535 = Vendor Reserved
Linktechnology
An enumeration of the types of links. When set to 1 (Other), the related property
OtherLinkTechnology contains a string description of the type of link.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Ethernet
• 3 = IB
• 4 = FC
• 5 = FDDI
• 6 = ATM
• 7 = Token Ring
• 8 = Frame Relay
• 9 = Infrared
• 10 = Bluetooth
Dell Command | Monitor 10.2.1 classes and properties 45