Reference Guide

ManualsBrandsDell ManualsAnalyticsCommand | Monitor 10.2.1

100

Property Description

(Not Applicable), then this property has no meaning. Refer to the EnabledState property

description for explanations of the values in the RequestedState enumeration. Unknown

(0) indicates the last requested state for the element is unknown.

NOTE: The value No Change (5) has been deprecated instead of indicating the

last requested state is Unknown (0). If the last requested or desired state is

unknown, RequestedState should have the value Unknown (0), but may have

the value No Change (5). Offline (6) indicates that the element has been

requested to transition to the Enabled but Offline EnabledState. There are two

new values in RequestedState that build on the statuses of EnabledState.

These are Reboot (10) and Reset (11). Reboot refers to doing a Shut Down and

then moving to an Enabled state. Reset indicates that the element is first

Disabled and then Enabled. Shut Down requests an orderly transition to the

Disabled state, and may involve removing power, to completely erase any

existing state. The Disabled state requests an immediate disabling of the

element, such that it will not execute or accept any commands or processing

requests.

This property is set as the result of a method invocation (such as Start or StopService on

CIM_Service), or can be overridden and defined as WRITEable in a subclass. The method

approach is considered superior to a WRITEable property, because it allows an explicit

invocation of the operation and the return of a result code.

If knowledge of the last RequestedState is not supported for the EnabledLogicalElement,

the property is NULL or has the value 12 (Not Applicable).

Possible values are:

• 0 = Unknown

• 2 = Enabled

• 3 = Disabled

• 4 = Shut Down

• 5 = No Change

• 6 = Offline

• 7 = Test

• 8 = Deferred

• 9 = Quiesce

• 10 = Reboot

• 11 = Reset

• 12 = Not Applicable

• .. = DMTF Reserved

• 32768..65535 = Vendor Reserved

SystemCreationClassName

The CreationClassName of the scoping system.

SystemName

The System Name of the scoping system.

TransitioningToState

Indicates the target state to which the instance is transitioning.