Reference Guide

Property Description
RequestedState should have the value Unknown (0), but
may have the value No Change (5).
There are two new values in RequestedState that build on the
statuses of EnabledState. These are
Reboot (10) and Reset (11).
Shut Down requests an orderly transition to the Disabled state, and
may involve removing power, to completely erase any existing
state. The Disabled state requests an immediate disabling of the
element, such that it will not execute or accept any commands or
processing requests. This property is set as the result of a method
invocation (such as Start or StopService on CIM_Service), or can
be overridden and defined as WRITEable in a subclass. The method
approach is considered superior to a WRITEable property, because
it allows an explicit invocation of the operation and the return of a
result code. If knowledge of the last RequestedState is not
supported for the EnabledLogicalElement, the property is NULL or
has the value 12 (Not Applicable).
Possible values are:
• 0 = Unknown — Indicates the last requested state for the
element is unknown.
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change
• 6 = Offline — Indicates that the element has been requested to
transition to the Enabled but Offline EnabledState.
• 7 = Test
• 8 = Deferred
• 9 = Quiesce
• 10 = Reboot — Refers to doing a Shut Down and then moving
to an
Enabled state.
• 11 = Reset - Indicates that the element is first Disabled and
then Enabled.
• 12 = Not Applicable
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
SystemCreationClassName
The CreationClassName of the scoping system.
SystemName
The System Name of the scoping system.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change — Indicates that no transition is in progress.
• 6 = Offline
• 7 = Test
• 8 = Defer
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable — Indicates the implementation does not
support representing ongoing transitions.
Dell Command | Monitor 10.2.1 classes and properties 87