Reference Guide

Property Description
to appear in InstanceID must appear between <OrgID> and <LocalID> . <LocalID> is chosen
by the business entity and should not be reused to identify different underlying (real-world)
elements. If the above preferred algorithm is not used, the defining entity must assure that
the resulting InstanceID is not reused across any InstanceIDs produced by this or other
providers for the NameSpace of this instance. For DMTF-defined instances, the
preferred
algorithm must be used with the <OrgID>set to CIM.
JobRunTimes
The number of times that the Job should be run. A value of 1 indicates that the Job is not
recurring, while any non-zero value indicates a limit to the number of times that the Job will
recur. Zero indicates that there is no limit to the number of times that the Job can be
processed, but that it is terminated either after the UntilTime or by manual intervention. By
default, a Job is processed once.
JobStatus
A free-form string that represents the status of the job. The primary status is reflected in
the inherited OperationalStatus property. JobStatus provides additional, implementation-
specific details.
Name
The user-friendly name for this instance of a Job. In addition, the user-friendly name can be
used as a property for a search or query.
NOTE: Name does not have to be unique within a namespace.
Priority
Indicates the urgency or importance of execution of the Job. The lower the number, the
higher the priority. Note that this property is also present in the JobProcessingStatistics
class. This class is necessary to capture the setting information that would influence the
results of a job.
TimeBeforeRemoval
The amount of time that the Job is retained after it has finished executing, either
succeeding or failing in that execution. The job must remain in existence for some period of
time regardless of the value of the DeleteOnCompletion property. The default is five
minutes.
DCIM_BootSourceSetting
Table 53. ConcreteJob
Property Description
BIOSBootString
A string identifying the boot source which corresponds to the string used by the BIOS to
uniquely name the boot source. For example, in systems which implement the BIOS Boot
Specification, the string could correspond to the descString string for entries in the IPL
Table or BCV Table.
ElementName
The user-friendly name for this instance of SettingData. In addition, the user-friendly name
can be used as an index property for a search or query.
NOTE: The name does not have to be unique within a namespace.
FailThroughSupported
An enumeration indicating the behavior when the attempt to boot using the boot source
fails (no media, timeout).
Possible values are:
• 0 = Unknown
• 1 = Is Supported — Indicates that next boot source the boot order is used.
• 2 = Not Supported — Indicates that the boot order is terminated and no other boot
sources associated to the same CIM_BootConfigSetting are used).
The default value is 1 (is supported).
InstanceID
Within the scope of the instantiating Namespace, InstanceID opaquely and uniquely
identifies an instance of this class. To ensure uniqueness within the NameSpace, the value
180 Dell Command | Monitor 10.2.1 classes and properties