Release Notes

Known Issues

Issue: While enumerating the supported BIOS features, the SMM Security may also be listed for conguration. But, user cannot set it to

disable using Dell Command | Monitor.

Resolution:These attributes are congured manually from BIOS Setup screen (F2).

Issue: Service startup time is increased due to the changed architecture at the core.

Issue: When user tries to enumerate supported BIOS features, the unsupported attributes, that is Peak Shift Battery Threshold is listed for

conguration. Since, it is not supported by the platform, user may not be able to congure it using DCM, but DCM displays it because it is

getting exposed in SMBIOS.

Resolution: These attributes are not functional prior to BIOS is xed.

Issue: While enumerating the supported BIOS features, the unsupported attributes Peak Shift Battery Threshold may also be listed for

conguration. As, it is not supported by the platform, user may not be able to congure it using DCM, but DCM still displays because it is

getting exposed in SMBIOS.

Resolution: These attributes are not functional prior BIOS getting it xed.

NOTE

: RearUsb3Ports and FrontUsbPortCollection are deprecated as these features are not applicable, but same attributes IDs

can be used for conguring WakeOnLan2.

Issue: Additional attributes that gets enumerated by DCM under DCM_BIOSEnumeration.

Description: Additional SMBIOS attributes that are available are displayed in DCM. These additional attributes are displayed in the

DCIM_BIOSEnumeration class and the set operation does not work as the attributes are not available in BIOS.

Following are the attributes:

• Force PXE on next boot on

• Force PXE on next boot o

• Watchdog timer on

• Watchdog timer o

Issue: Some attributes does not work as expected which are enumerated by DCM under DCM_BIOSEnumeration.

Description: Additional SMBIOS attributes that are available are displayed in DCM. These additional attributes are displayed in the

DCIM_BIOSEnumeration class but the set operation does not work on these attributes. Following are the attributes:

Following are the attributes:

• LCD brightness

• Keyboard illumination

• Modern standby control

• Energy star logo

Issue: dsm_sa_datamgr32 service stops responding while installing chipset driver

Description: This issue occurs only when Dell Command | Monitor is installed on some platforms before installing the chipset driver.

Issue: SecureEraseSupported and SecureEraseEnabled parameters in HDDInfo displays ‘No’ even if enabled from BIOS setup screen.

This issue will be addressed in the upcoming BIOS versions.

Issue: dsm_sa_datamgr32 service stops responding while installing chipset driver.

Known Issues