Reference Guide

Property Description
• 30 = Non-recoverable error — The element has completely
failed, and recovery is not possible. All functionality provided by
this element has been lost.
• .. = DMTF Reserved
StatusInfo
The use of this method is deprecated instead of a more clearly
named property (EnabledState) that is inherited from
ManagedSystemElement and that has additional enumerated
values. Deprecated description: The StatusInfo property indicates
whether the Logical Device is in an enabled state (value = 3),
disabled state (value = 4), some other state (value = 1), or an
unknown state (value = 2). If this property does not apply to the
LogicalDevice, the value 5 (Not Applicable) should be used. If a
Device is Enabled (value = 3), it has been powered up and is
congured and operational. The Device may or may not be
functionally active, depending on whether its Availability (or
AdditionalAvailability) indicates that it is Running/Full Power (value
= 3) or O line (value = 8). In an enabled but oine mode, a
Device may be performing out-of-band requests, such as running
Diagnostics. If StatusInfo is Disabled (value = 4), a Device can only
be enabled or powered o. In a personal computer environment,
disabled means that the driver of the device is not available in the
stack. In other environments, a Device can be disabled by removing
its conguration le. A disabled device is physically present in a
System and consuming resources, but it cannot be communicated
with until a driver is loaded, a conguration le is loaded, or some
other enabling activity has occurred.
Possible values are:
• 1 = Other
• 2 = Unknown
• 3 = Enabled
• 4 = Disabled
• 5 = Not Applicable
SystemCreationClassName
The CreationClassName of the scoping system.
SystemName
The System Name of the scoping system.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change — Indicates that no transition is in progress.
• 6 = Oine
• 7 = Test
• 8 = Defer
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable — Indicates the implementation does not
support representing ongoing transitions.
Dell Command | Monitor10.1.0 classes and properties 93