Reference Guide
Property Description
• 6 = Enabled but Oine — Indicates that the element may be
completing commands, and will drop any new requests.
• 7 = In Test — Indicates that the element is in a test state.
• 8 = Deferred — Indicates that the element may be completing
commands, but will queue any new requests.
• 9 = Quiesce — Indicates that the element is enabled but in a
restricted mode.
• 10 = Starting — Indicates that the element is in the process of
going to an Enabled state. New requests are queued.
• 11..32767 = DMTF Reserved
• 32768..65535 = Vendor Reserved
ErrorMethodology
ErrorMethodology for Memory is a string property that indicates
whether parity or CRC algorithms, ECC or other mechanisms are
used. Details on the algorithm can also be supplied.
FailOverState
An integer enumeration indicating that active memory has failed and
the spare or backup memory may have taken over.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = None
• 3 = Active
HealthState
Indicates the current health of the element. This attribute expresses
the health of this element but not necessarily that of its
subcomponents.
Possible values are:
• 0 = Unknown — The implementation cannot report on
HealthState at this time. DMTF has reserved the unused
portion of the continuum for additional HealthStates in the
future.
• 5 = OK — The element is fully functional and is operating within
normal operational parameters and without error.
• 10 = Degraded/Warning — The element is in working order and
all functionality is provided. However, the element is not working
to the best of its abilities. For example, the element may not be
operating at optimal performance or it may be reporting
recoverable errors.
• 15 = Minor failure — All functionality is available but some may
be degraded.
• 20 = Major failure — The element is failing. It is possible that
some or all of the functionality of this component is degraded or
not working.
• 25 = Critical failure — The element is non-functional and
recovery may not be possible.
• 30 = Non-recoverable error — The element has completely
failed, and recovery is not possible. All functionality provided by
this element has been lost.
• .. = DMTF Reserved
NumberOfBlocks
Total number of logically contiguous blocks, of size Block Size,
which form this Extent. The total size of the Extent can be
calculated by multiplying BlockSize by NumberOfBlocks. If the
BlockSize is 1, this property is the total size of the Extent.
Dell Command | Monitor10.1.0 classes and properties 87