Reference Guide

Property Description
speeds are valid. These are: 1.5Mbps and 12Mbps. The value 0 can
also be specied to indicate that the current speed is unknown or 1
to indicate that the speed is other than 1.5 or 12Mbps. Possible
values are: 0, 1, 1500000, 12000000
SystemCreationClassName
The CreationClassName of the scoping system.
SystemName
The System Name of the scoping system.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change — Indicates that no transition is in progress.
• 6 = Oine
• 7 = Test
• 8 = Defer
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable — Indicates the implementation does not
support representing ongoing transitions.
A value other than 5 or 12 identies the state to which the element
is in the process of transitioning.
DCIM_Memory
Property
Description
Access
Access describes whether the media is readable (value = 1),
writeable (value = 2), or both (value = 3). Unknown (0) and Write
Once (4) can also be dened.
Possible values are:
• 0 = Unknown
• 1 = Readable
• 2 = Writeable
• 3 = Read/Write Supported
• 4 = Write Once
BlockSize
Size in bytes of the blocks which form this StorageExtent. If
variable block size, then the maximum block size in bytes should be
specied. If the block size is unknown or if a block concept is not
valid (for example, for AggregateExtents, Memory or LogicalDisks),
enter a 1.
ConsumableBlocks
The maximum number of blocks, of size BlockSize, which are
available for consumption when layering StorageExtents using the
BasedOn association. This property only has meaning when this
StorageExtent is an Antecedent reference in a BasedOn
Dell Command | Monitor10.1.0 classes and properties 85