Reference Guide

Property Description
Possible values are:
• 0 = Unknown — Indicates that the last requested state for the
element is unknown.
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change
• 6 = Oine — Indicates that the element has been requested to
transition to the Enabled but Oine EnabledState.
• 7 = Test
• 8 = Deferred
• 9 = Quiesce
• 10 = Reboot — Refers to doing a Shut Down and then moving
to an Enabled state.
• 11 = Reset — Indicates that the element is rst Disabled and
then Enabled.
• 12 = Not Applicable
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
Security
An enumeration indicating the operational security for the
Controller. For example, information that the Device's external
interface is locked out (value = 4) or Boot Bypass (value = 6) can
be described using this property.
Possible values are:
• 1 = Other
• 2 = Unknown
• 3 = None
• 4 = External Interface Locked Out
• 5 = External Interface Enabled
• 6 = Boot Bypass
SerialPortCapabilities
The capabilities of this Serial port.
Possible values are:
• 1 = Other
• 2 = Unknown
• 3 = XT/AT compatible
• 4 = 16450 compatible
• 5 = 16550 compatible
• 6 = 16550A compatible
• 160 = 8251 compatible
• 161 = 8251FIFO compatible
SystemCreationClassName
The creation class name of the scoping system.
SystemName
The system name of the scoping system.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
• 0 = Unknown
• 2 = Enabled
Dell Command | Monitor10.1.0 classes and properties 81