Reference Guide

ManualsBrandsDell ManualsAnalyticsCommand | Monitor 10.1.0

Property Description

or Degraded so that a client can tell if the complete operation

Completed with OK (passed), Completed with Error (failed), or

Completed with Degraded (the operation nished, but it did not

complete OK or did not report an error).

• 18 = Power Mode — Indicates that the element has additional

power model information contained in the Associated

PowerManagementService association.

• .. = DMTF Reserved

• 0x8000.. = Vendor Reserved

OperationalStatus replaces the Status property on

ManagedSystemElement to provide a consistent approach to

enumerations, to address implementation needs for an array

property, and to provide a migration path from today's environment

to the future. This change was not made earlier because it required

the deprecated qualier. Due to the widespread use of the existing

Status property in management applications, it is recommended

that providers or instrumentation provide both the Status and

OperationalStatus properties. Further, the rst value of

OperationalStatus should contain the primary status for the

element. When instrumented, Status (because it is single-valued)

should also provide the primary status of the element.

PortType

PortType is dened to force consistent naming of the type property

in subclasses and to guarantee unique enum values for all instances

of NetworkPort. When set to 1 (Other), related property

OtherPortType contains a string description of the type of port. A

range of values, DMTF_Reserved, has been dened that allows

subclasses to override and dene their specic types of ports.

Possible values are:

• 0 = Unknown

• 1 = Other

• 2 = Not Applicable

• 3..15999 = DMTF Reserved

• 16192 = Parallel Port

• 16193 = Serial Port

• 16194 = Pointing Device

• 16195 = Keyboard

• 16196 = Processor

• 16197 = Memory Device

• 16198 = USB

• 16199 = Monitor

• 16200 = SCSI

• 16201..65535 = Vendor Reserved

PrimaryStatus

Provides a high-level status value, intended to align with Red-

Yellow-Green type representation of status. It should be used with

DetailedStatus to provide high level and detailed health status of

the ManagedElement and its subcomponents.