Reference Guide

Property Description
• 17 = PCI-X — Describes the PCI Extended connector layout.
• 18 = PCI-E — Describes the PCI Express connector layout,
where the actual layout with respect to the length is unknown.
• 19 = PCI-E x1
• 20 = PCI-E x2
• 21 = PCI-E x4
• 22 = PCI-E x8
• 23 = PCI-E x16
• 24 = PCI-E x32
• 25 = PCI-E x64
• 26..32567 = DMTF Reserved
• 32568..65535 = Vendor Reserved
19 — 25 (PCI-E xN) — Describes the PCI Express connector
layout, where N is the lane count that appropriately describes the
length of the PCI-E connector.
ConnectorType
An array of integers dening the type of PhysicalConnector. An
array is specied to allow the description of combinations of
Connector information.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Male
• 3 = Female
• 4 = Shielded
• 5 = Unshielded
• 6 = SCSI (A) High-Density (50 pins)
• 7 = SCSI (A) Low-Density (50 pins)
• 8 = SCSI (P) High-Density (68 pins)
• 9 = SCSI SCA-I (80 pins)
• 10 = SCSI SCA-II (80 pins)
• 11 = Fibre Channel (DB-9, Copper)
• 12 = Fibre Channel (Optical Fibre)
• 13 = Fibre Channel SCA-II (40 pins)
• 14 = Fibre Channel SCA-II (20 pins)
• 15 = Fibre Channel BNC
• 16 = ATA 3-1/2 Inch (40 pins)
• 17 = ATA 2-1/2 Inch (44 pins)
• 18 = ATA-2
• 19 = ATA-3
• 20 = ATA/66
• 21 = DB-9
• 22 = DB-15
• 23 = DB-25
• 24 = DB-36
• 25 = RS-232C
• 26 = RS-422
• 27 = RS-423
• 28 = RS-485
• 29 = RS-449
72
Dell Command | Monitor10.1.0 classes and properties